Lens Insertion
Applying Eye Drops Prior to Insertion and Removal is a MUST! You MUST Insert Lenses Rapidly to prevent the lens from SHRIVELING and sticking to the OptiWand®. Try both ends to insert lenses as you may prefer one side better than the other.
🏆 Available on Amazon and eBay only!
Helpful Tips
Applying Eye Drops Prior to Insertion and Removal is a MUST!
You MUST Insert Lenses Rapidly to prevent the lens from SHRIVELING and sticking to the OptiWand®.
This will be difficult to use Without proper Lubrication and moving quickly.
Lubrication is a MUST as lenses dry rapidly out of solution.
TRY Both Ends to insert lenses as you may prefer one side better than other.
Many have a natural reaction to an object approaching the eye and look up.
The OptiWand® may not work if you cannot look directly at the center hole of the wand.
Click Here for
Contact Lens Removal
with OptiWand Bullseye and Pincher
Inserting PRG and Large Sclera Contact Lenses with OptiWand Hard
- Step 1: Applying Eye Drops Prior to Insertion and Removal is a MUST!
Dip your OptiWand® in Contact Lens solution for lubrication Step 2: Position your HARD or SOFT contact lens on the center of FULL OR SPLIT CUP SIDE of the OptiWand®
Smaller soft lenses can be inserted using the SPLIT CUP end.- Step 3: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.
Step 4: Draw the OptiWand® to your eye by focusing on the contact lens, colored wand or CENTER HOLE to align properly
*Aiming the OptiWand® at a colored background or light will help some to focus on the CENTER HOLE*
Step 5: Once the contact lens touches your eye,
TWIST the OptiWand® to help release the lens.
Step 6: BLINK, BLINK your contact into place. Now your lens is centered on your eye.
* Make sure to HOLD EYE OPEN WIDE & hold eyelashes away to prevent blockage. *
WARNING **NEVER USE OptiWand® ON NAKED EYE**
Please DO NOT USE the OptiWand® if you are allergic to Liquid Silicone Rubber!
FAQ for soft contact lens insertion insertion
You can use the SPLIT CUP SIDE to insert and remove smaller soft lenses as well. Try both ends to see which works best for you.
The Split Cup is designed for large lenses & hybrids for insertion but can be used for some smaller
soft lenses in the same method as other soft lenses are inserted.
OptiWand® is designed to place the lens directly on the cornea where the lenses rest naturally.
OptiWand® will NOT RELEASE the soft lens unless you focus on the
contact lens, colored wand or CENTER hole and use it to
place the lens on the cornea where it rests after you give the
OptiWand® a slight twist to help release the lens.
Applying Eye Drops Prior to Insertion and Removal is a MUST!
If you look up, down or to the side the OptiWand®
 will hold the soft lens and it won’t come off easily or at all.
Some find it helps to pinch the Full Cup very high on the base during insertion to allow the lens to release to the eye.
