OptiWand Pincher

Using Eye Drops Prior To Insertion & Removal Is a MUST.

Keep Eyes Lubricated & Make Transfer Easier!

Complete the insertion process RAPIDLY or the Soft Lenses

will stick to the Wand making insertion impossible.

The OptiWand Pincher ® is designed to hold the lens until it is placed on the cornea.

TWISTING the wand when it touches the eye helps release and set the lens.

Inserting SOFT Contact Lenses with OptiWand Pincher ®

It is best to complete the insertion process as QUICKLY as possible as LENSES DRY RAPIDLY OUT OF SOLUTION.

Step 1: Apply Eye Drops for lubrication. Dip your OptiWand Pincher ® in Contact Lens solution for lubrication.

Step 2: Position your regular sized HARD or SOFT contact lens on the center of EITHER SIDE of the OptiWand Pincher ®.

Step 3: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.

Step 4: Draw the OptiWand Pincher ® to your eye by looking DIRECTLY AT THE LENS, colored wand or the CENTER HOLE to align properly.

*Aiming the OptiWand Pincher ® at a colored background or light will help some to focus on the CENTER HOLE*

Step 5: Once it is close enough and the contact lens touches your eye, give the OptiWand Pincher ® a slight twist to help release the lens

Step 6: Blink your contact into place. Now your lens is centered on your eye.

*Make sure to hold eyelashes away to prevent blockage. *

WARNING **NEVER USE an OptiWand Pincher ® ON A NAKED EYE**

Please DO NOT USE the OptiWand Pincher ® if you are allergic to Liquid Silicone Rubber!

Soft Contact Lenses are NOT a solid material and CAN’ T BE SUCTIONED out without pulling the eye with it. They can be PINCHED out with either pliable end. The FULL cup provides more coverage for large fingers and the SPLIT cup works better for users with small eyes or lenses.

Removing SOFT Contact Lenses with OptiWand Pincher ®

Step 1: Apply Eye Drops for lubrication. Use a DRY OptiWand Pincher ®.

Step 2: Using your non-dominant hand spread your eye lids as wide as possible, keeping your eyelashes out of the way.

Step 3: Focusing on the colored wand or CENTER HOLE, draw the OptiWand Pincher ® to your eye until you touch the soft contact lens.

Step 4: Once you feel the OptiWand Pincher ® touch the soft contact lens you should TWIST it slightly then carefully PINCH the soft contact lens with the Base of the OptiWand Pincher ® and swipe away from eye. Some users can turn the OptiWand Pincher ® towards their noses after it makes contact and that will help push it out.